Chaîne de caractères
Just a note to Verdauga about her note to Blooptech...
In International English (as opposed to US English), 'and' is used to separate numbers - so you would say 'Four thousand, seven hundred and twenty eight'.
For decimals, you would say 'point three four' instead of 'and thirty four hundredths'.
(At least, this is how we do it in England - for all I know there may be more country-specific differences.)
Fonctions sur les chaînes de caractères
Voir aussi
Pour des fonctions encore plus puissantes de gestion et manipulation des chaînes, reportez-vous aux expressions rationnelles POSIX et expressions rationnelles Perl.
Sommaire
- addcslashes — Ajoute des slash dans une chaîne, à la mode du langage C
- addslashes — Ajoute des antislashs dans une chaîne
- bin2hex — Convertit des données binaires en représentation hexadécimale
- chop — Alias de rtrim
- chr — Retourne un caractère spécifique
- chunk_split — Scinde une chaîne
- convert_cyr_string — Convertit une chaîne d'un jeu de caractères cyrillique à l'autre
- convert_uudecode — Décode une chaîne au format uuencode
- convert_uuencode — Encode une chaîne de caractères en utilisant l'algorithme uuencode
- count_chars — Retourne des statistiques sur les caractères utilisés dans une chaîne
- crc32 — Calcule la somme de contrôle CRC32
- crypt — Chiffrage indéchiffrable (hashing)
- echo — Affiche une chaîne de caractères
- explode — Coupe une chaîne en segments
- fprintf — Écrit une chaîne formatée dans un flux
- get_html_translation_table — Retourne la table de traduction des entités utilisée par htmlspecialchars et htmlentities
- hebrev — Convertit un texte logique hébreux en texte visuel
- hebrevc — Convertit un texte logique hébreux en texte visuel, avec retours à la ligne
- html_entity_decode — Convertit toutes les entités HTML en caractères normaux
- htmlentities — Convertit tous les caractères éligibles en entités HTML
- htmlspecialchars_decode — Convertit les entités HTML spéciales en caractères
- htmlspecialchars — Convertit les caractères spéciaux en entités HTML
- implode — Rassemble les éléments d'un tableau en une chaîne
- join — Alias de implode
- lcfirst — Met le premier caractère en minuscule
- levenshtein — Calcule la distance Levenshtein entre deux chaînes
- localeconv — Lit la configuration locale
- ltrim — Supprime les espaces (ou d'autres caractères) de début de chaîne
- md5_file — Calcule le md5 d'un fichier
- md5 — Calcule le md5 d'une chaîne
- metaphone — Calcule la clé metaphone
- money_format — Met un nombre au format monétaire
- nl_langinfo — Rassemble des informations sur la langue et la configuration locale
- nl2br — Insère un retour à la ligne HTML à chaque nouvelle ligne
- number_format — Formate un nombre pour l'affichage
- ord — Retourne le code ASCII d'un caractère
- parse_str — Analyse une requête HTTP
- print — Affiche une chaîne de caractères
- printf — Affiche une chaîne de caractères formatée
- quoted_printable_decode — Convertit une chaîne quoted-printable en chaîne 8 bits
- quoted_printable_encode — Convert a 8 bit string to a quoted-printable string
- quotemeta — Protège les métacaractères
- rtrim — Supprime les espaces (ou d'autres caractères) de fin de chaîne
- setlocale — Modifie les informations de localisation
- sha1_file — Calcule le sha1 d'un fichier
- sha1 — Calcule le sha1 d'une chaîne de caractères
- similar_text — Calcule la similarité de deux chaînes
- soundex — Calcule la clé soundex
- sprintf — Retourne une chaîne formatée
- sscanf — Analyse une chaîne à l'aide d'un format
- str_getcsv — Analyse une chaîne de caractères CSV dans un tableau
- str_ireplace — Version insensible à la casse de str_replace
- str_pad — Complète une chaîne jusqu'à une taille donnée
- str_repeat — Répète une chaîne
- str_replace — Remplace toutes les occurrences dans une chaîne
- str_rot13 — Effectue une transformation ROT13
- str_shuffle — Mélange les caractères d'une chaîne de caractères
- str_split — Convertit une chaîne de caractères en tableau
- str_word_count — Compte le nombre de mots utilisés dans une chaîne
- strcasecmp — Comparaison insensible à la casse de chaînes binaires
- strchr — Alias de strstr
- strcmp — Comparaison binaire de chaînes
- strcoll — Comparaison de chaînes localisées
- strcspn — Trouve un segment de chaîne ne contenant pas certains caractères
- strip_tags — Supprime les balises HTML et PHP d'une chaîne
- stripcslashes — Décode une chaîne encodée avec addcslashes
- stripos — Recherche la première occurrence dans une chaîne, sans tenir compte de la casse
- stripslashes — Supprime les antislashs d'une chaîne
- stristr — Version insensible à la casse de strstr
- strlen — Calcule la taille d'une chaîne
- strnatcasecmp — Comparaison de chaînes avec l'algorithme d'"ordre naturel" (insensible à la casse)
- strnatcmp — Comparaison de chaînes avec l'algorithme d'"ordre naturel"
- strncasecmp — Compare en binaire des chaînes de caractères
- strncmp — Comparaison binaire des n premiers caractères
- strpbrk — Recherche une chaîne de caractères dans un ensemble de caractères
- strpos — Trouve la position d'un caractère dans une chaîne
- strrchr — Trouve la dernière occurrence d'un caractère dans une chaîne
- strrev — Inverse une chaîne
- strripos — Trouve la position de la dernière occurrence d'une chaîne dans une autre, de façon insensible à la casse
- strrpos — Trouve la position de la dernière occurrence d'un caractère dans une chaîne
- strspn — Trouve le premier segment de chaîne
- strstr — Trouve la première occurrence dans une chaîne
- strtok — Coupe une chaîne en segments
- strtolower — Renvoie une chaîne en minuscules
- strtoupper — Renvoie une chaîne en majuscules
- strtr — Remplace des caractères dans une chaîne
- substr_compare — Compare deux chaînes depuis un offset jusqu'à une longueur en caractères
- substr_count — Compte le nombre d'occurrences de segments dans une chaîne
- substr_replace — Remplace un segment dans une chaîne
- substr — Retourne un segment de chaîne
- trim — Supprime les espaces (ou d'autres caractères) en début et fin de chaîne
- ucfirst — Met le premier caractère en majuscule
- ucwords — Met en majuscule la première lettre de tous les mots
- vfprintf — Écrit une chaîne formatée dans un flux
- vprintf — Affiche une chaîne formatée
- vsprintf — Retourne une chaîne formatée
- wordwrap — Effectue la césure d'une chaîne
add a note
User Contributed NotesFonctions sur les chaînes de caractères
Jon
01-Sep-2008 12:36
01-Sep-2008 12:36
kriskra at gmail dot com
04-Aug-2008 02:10
04-Aug-2008 02:10
In reference to Moe... best random string function
<?php
function random_string($l = 10){
$c = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxwz0123456789";
for(;$l > 0;$l--) $s .= $c{rand(0,strlen($c))};
return str_shuffle($s);
}
?>
Salomon
28-Mar-2008 12:43
28-Mar-2008 12:43
If you want to indent a block of text with $level tabs, you can use
function str_indent($level, $text) {
return str_repeat("\t", $level).str_replace("\n", "\n".str_repeat("\t", $level), $text);
}
Verdauga
20-Mar-2008 04:06
20-Mar-2008 04:06
Just a note in regards to bloopletech a few posts down:
The word "and" should not be used when converting numbers to text. "And" (at least in US English) should only be used to indicate the decimal place.
Example:
1,796,706 => one million, seven hundred ninety-six thousand, seven hundred six.
594,359.34 => five hundred ninety four thousand, three hundred fifty nine and thirty four hundredths
geek dot de at gmail dot com
07-Jan-2008 01:18
07-Jan-2008 01:18
This took me quite some time to figure out and it is so obvious. So, I hope it helps someone out there like it would have helped me if I would have found it on this page:
I wanted to read a binary file and write it out with some modified bytes with their hex values. The easiest way I could come up with was the following:
read the file line by line, e.g. 400 bytes and then chuck it into an array with e.g.
<?php
$handle = @fopen("/path/to/file.bin", "r");
if ($handle) {
while (!feof($handle)) {
$buffer[] = fgets($handle, 400);
}
fclose($handle);
$buffer[0][0] = chr(hexdec("FF")); // set the first byte to 0xFF
}
// write out the file from the array ...
?>
One could write a function for that, so that One can write a string of bytes. Don't have time for this now but you should get the idea.
m
27-Jul-2007 03:10
27-Jul-2007 03:10
Regarding the code for the function beginsWith($str, $sub), I found that it has problems when only one character is present after the string searched for. I found that this works better instead:
<?php
function beginsWith($str, $sub) {
return (strncmp($str, $sub, strlen($sub)) == 0);
}
?>
Moe
10-Jul-2007 04:44
10-Jul-2007 04:44
In responce to mike here is a better random string function
<?php
function random_string($max = 20){
$chars = "abcdefghijklmnopqrstuvwxwz0123456789_";
for($i = 0; $i < $max; $i++){
$rand_key = mt_rand(0, strlen($chars));
$string .= substr($chars, $rand_key, 1);
}
return str_shuffle($string);
}
?>
mike "eyes" moe
18-Jun-2007 03:59
18-Jun-2007 03:59
Here is a truly random string generator it uses the most common string functions it will work on anywhere.
<?php
function random_string($max = 20){
$chars = explode(" ", "a b c d e f g h i j k l m n o p q r s t u v w x y z 0 1 2 3 4 5 6 7 8 9");
for($i = 0; $i < $max; $i++){
$rnd = array_rand($chars);
$rtn .= base64_encode(md5($chars[$rnd]));
}
return substr(str_shuffle(strtolower($rtn)), 0, $max);
}
?>
bloopletech at gmail dot com
23-May-2007 04:05
23-May-2007 04:05
[Editor's Note: Remember that number names are locale-specific. Thus in the US 1,000,000,000 is called a billion, while in other countries this might be different (ie. miljard in Dutch). This function provides support only for the US locale]
If you want to convert a number, (int or float) to full spoken text, then you can use my num2text converter, at http://bloople.net/num2text
Examples:
40000 => forty thousand
1,796,706 => one million, seven hundred and ninety-six thousand, seven hundred and six.
If works for positive an negative integers/floats/doubles. The code is only a page long, and you don't have to install any modules or anything.
I hope this comes in handy for somebody!
benjamin at webbutvecklarna dot se
26-Mar-2007 03:23
26-Mar-2007 03:23
An update to admin at fivestarbuy dot com's StrParse. Since php5.2.x the occurance of an object in the vardata will cause a "Catchable fatal error". Previously it has failed silently, so I added nullification of present objects.
I also updated comments to be more specific, I hope that's ok with you, admin at fivestarbuy dot com:
<?php
function StrParse($str,$vardata) {
# Variables present in $str is replaced by values of variables in $vardata
# typical use:
# $vardata = get_defined_vars();
# $str = some template code with variables present.
# uncomment the echo line to debug.
$getvarkeys=array_keys($vardata);
$ret=$str;
for ($x=0; $x < count($getvarkeys); $x++) {
$myvar=$getvarkeys[$x];
if(is_object($vardata[$myvar])) $vardata[$myvar] = null;
#echo "Variable: " . $myvar . " [" . $vardata[$myvar] . "]<br>";
$ret=str_replace('$' . $myvar, $vardata[$myvar], $ret);
}
return $ret;
}
?>
beggining pro
02-Aug-2006 09:00
02-Aug-2006 09:00
Well for you egold users out ther I wrote this to just return the balance ONLY
If anyone knows a better way to write this lemme know as im a novice
function _GetBalance($from, $frompass) {
$defined_vars = get_defined_vars();
$_url = 'https://www.e-gold.com/acct/balance.asp';
$_url_p = "AccountID=" . $from . "&PassPhrase=" . $frompass ."";
$ch = curl_init();
curl_setopt($ch, CURLOPT_POST,1);
curl_setopt($ch, CURLOPT_POSTFIELDS,$_url_p);
curl_setopt($ch, CURLOPT_URL,$_url);
curl_setopt($ch, CURLOPT_SSL_VERIFYHOST, 2);
curl_setopt($ch, CURLOPT_USERAGENT, $defined_vars['HTTP_USER_AGENT']);
curl_setopt($ch, CURLOPT_RETURNTRANSFER,1);
$content = curl_exec ($ch);
curl_close ($ch);
$content=strtolower($content);
$content=strstr($content,"</select></font></th></form></tr>");
$content=strip_tags($content);
$content=strrev($content);
$content=strstr($content,"eseht :eton");
$content=str_replace("eseht :eton","",$content);
$content=ltrim($content);
$content=rtrim($content);
$content=substr($content,0,11);
$content=strrev($content);
$content=ltrim($content);
return $content;
}
admin at rotarymulundeast dot org
30-Jul-2006 01:16
30-Jul-2006 01:16
Here's an easier way to find nth...
function nth($numbex){
if ($numbex%10 == 1 && $numbex%100 != 11) $sth='st';
elseif ($numbex%10 == 2 && $numbex%100 != 12) $sth='nd';
elseif ($numbex%10 == 3 && $numbex%100 != 13) $sth='rd';
else $sth = 'th';
return $sth;
}
there is is no need to check if the user has entered a non-integer as we may be using this function for expressing variables as well eg. ith value of x , nth root of z ,etc...
heavyraptor
27-Jul-2006 06:17
27-Jul-2006 06:17
I think that
administrador(ensaimada)sphoera(punt)com's function is
too complicated. It's easier with regular expressions.
So I made this function, it isn't really the same,
it's even better because it returns an array with all the
matches found
If there are no matches, false is returned.
<?php
// bool/array str_between( string str, string
start_str, string end_str )
function str_between($str,$start,$end) {
if (preg_match_all('/' . preg_quote($start) . '(.*?)' . preg_quote($end) . '/',$str,$matches)) {
return $matches[1];
}
// no matches
return false;
}
?>
Enjoy
da (dot) blayde (a t) gmail (dot) com
19-Jul-2006 08:52
19-Jul-2006 08:52
Sometimes when converting integers to strings, it looks better to have the number spelled out. I wrote this function that converts integers from -999 to 999 into spelled out strings:
function int2str($int=0){
$doOnes=true;
$neg=$int<0?true:false;
$int=abs(round($int));
$str='';
switch(strlen($int)){
case 1:$int='0'.$int;
case 2:$int='0'.$int;
case 3:$int.='';break;
default:return $int;
}
switch($int{0}){
case 1:$str.='one-hundred-';break;
case 2:$str.='two-hundred-';break;
case 3:$str.='three-hundred-';break;
case 4:$str.='four-hundred-';break;
case 5:$str.='five-hundred-';break;
case 6:$str.='six-hundred-';break;
case 7:$str.='seven-hundred-';break;
case 8:$str.='eight-hundred-';break;
case 9:$str.='nine-hundred-';break;
}
switch($int{1}){
case 1:
switch($int{2}){
case 0:$str.='ten-';break;
case 1:$str.='eleven-';break;
case 2:$str.='twelve-';break;
case 3:$str.='thirteen-';break;
case 4:$str.='fourteen-';break;
case 5:$str.='fifteen-';break;
case 6:$str.='sixteen-';break;
case 7:$str.='seventeen-';break;
case 8:$str.='eighteen-';break;
case 9:$str.='nineteen-';break;
}
$doOnes=false;
break;
case 2:$str.='twenty-';break;
case 3:$str.='thirty-';break;
case 4:$str.='forty-';break;
case 5:$str.='fifty-';break;
case 6:$str.='sixty-';break;
case 7:$str.='seventy-';break;
case 8:$str.='eighty-';break;
case 9:$str.='ninety-';break;
}
if($doOnes){
switch($int{2}){
case 1:$str.='one-';break;
case 2:$str.='two-';break;
case 3:$str.='three-';break;
case 4:$str.='four-';break;
case 5:$str.='five-';break;
case 6:$str.='six-';break;
case 7:$str.='seven-';break;
case 8:$str.='eight-';break;
case 9:$str.='nine-';break;
}}
$str=substr($str,0,-1);
if($neg){
$str='negative '.$str;
}
if($int=='000'){
$str='zero';
}
return $str;
}
Hope this helps someone,
-Blayde
mickycole at hotmail dot com
19-Jul-2006 10:01
19-Jul-2006 10:01
In responce to James Baker's sencence case function.
Great function however i would make one slight variation being that it doesn't take into account the fact that a capital is required after a new paragraph so i modified it to check for /r and /n as follows:
<?PHP
/*/ Author : James Baker /*/
function sentenceCase($s){
$str = strtolower($s);
$cap = true;
for($x = 0; $x < strlen($str); $x++){
$letter = substr($str, $x, 1);
if($letter == "." || $letter == "!" || $letter == "?" || $letter == "\n" || $letter == "\r"){
$cap = true;
}elseif($letter != " " && $cap == true){
$letter = strtoupper($letter);
$cap = false;
}
$ret .= $letter;
}
return $ret;
}
?>
administrador(ensaimada)sphoera(punt)com
02-Mar-2006 04:10
02-Mar-2006 04:10
I've prepared this simple function to obtain a string delimited between tags (not only XML tags!). Anybody needs something like this?.
<?php
function get_string_between($string, $start, $end){
$string = " ".$string;
$ini = strpos($string,$start);
if ($ini == 0) return "";
$ini += strlen($start);
$len = strpos($string,$end,$ini) - $ini;
return substr($string,$ini,$len);
}
$string = "this [custom] function is useless!!";
echo get_string_between($string,"[","]");
// must return "custom";
?>
more functions at http://www.sphoera.com
SteveRusin
24-Feb-2006 09:00
24-Feb-2006 09:00
The functions below:
function beginsWith( $str, $sub )
function endsWith( $str, $sub )
Are correct, but flawed. You'd need to use the === operator instead:
function beginsWith( $str, $sub ) {
return ( substr( $str, 0, strlen( $sub ) ) === $sub );
}
function endsWith( $str, $sub ) {
return ( substr( $str, strlen( $str ) - strlen( $sub ) ) === $sub );
}
Otherwise, endsWith would return "foobar.0" ends with ".0" as well as "0" or "00" or any amount of zeros because numerically .0 does equal 0.
navarr at gmail dot com
21-Dec-2005 04:24
21-Dec-2005 04:24
stripos for PHP4.x
<?php
function stripos($haystack,$needle) {
return strpos(strtoupper($haystack),strtoupper($needle));
}
?>
dkflbk at nm dot ru
11-Dec-2005 06:58
11-Dec-2005 06:58
I needed str2bin() function for one of my project, so if some one else is want to use it, have fun :)
<?php
/**
* Returns an ASCII string containing
* the binary representation of the input data .
**/
function str2bin($str, $mode=0) {
$out = false;
for($a=0; $a < strlen($str); $a++) {
$dec = ord(substr($str,$a,1));
$bin = '';
for($i=7; $i>=0; $i--) {
if ( $dec >= pow(2, $i) ) {
$bin .= "1";
$dec -= pow(2, $i);
} else {
$bin .= "0";
}
}
/* Default-mode */
if ( $mode == 0 ) $out .= $bin;
/* Human-mode (easy to read) */
if ( $mode == 1 ) $out .= $bin . " ";
/* Array-mode (easy to use) */
if ( $mode == 2 ) $out[$a] = $bin;
}
return $out;
}
?>
admin at fivestarbuy dot com
21-Oct-2005 07:18
21-Oct-2005 07:18
This example lets you parse an unparsed strings variables. Warning: This could cause security leaks if you allow users to pass $variables through this engine. I recommend only using this for your Content Management System.
<?
$mytime=time();
$mydog="My Dog Ate My PHP!";
# Your Parsing String:
$s1 = 'Hyphen Variable Preserving: $mytime, and $mydog';
echo "Before: <br><br>$s1<br><br>";
# Remember, wherever you define this, it will not be defined GLOBAL into the function
# which is why we define it here. Defining it global could lead to security issues.
$vardata=get_defined_vars();
# Parse the string
$s1 = StrParse($s1,$vardata);
echo "After: <br><br>$s1";
function StrParse($str,$vardata) {
# Takes a string, or piece of data, that contains PHP Variables
# For example, unparsed variables like: Test using time: $mytime
# This example shows $mytime, and not the actual variable value.
# The end result shows the actual variable value of $mytime.
# This is useful for building a content management system,
# and directing your variables into your content data,
# where content is stored in a file or database, unparsed.
# Of course this could slow down page loads, but it's a good way
# to parse data from current variables into your loaded new data
# making it compatible.
# Then the variables are replaced with the actual variable..
$getvarkeys=array_keys($vardata);
$ret=$str;
for ($x=0; $x < count($getvarkeys); $x++) {
$myvar=$getvarkeys[$x];
#echo "Variable: " . $myvar . " [" . $vardata[$myvar] . "]<br>";
$ret=str_replace('$' . $myvar, $vardata[$myvar], $ret);
}
return $ret;
}
?>
18-Oct-2005 01:27
to: james dot d dot baker at gmail dot com
PHP has a builtin function for doing what your function does,
http://php.net/ucfirst
http://php.net/ucwords
14-Oct-2005 06:24
Updated; used to test for input as an array, should have been a string, added some validation of the input while I was at it. Enjoy.
<?php
/*---------- Directory Tree to Array ----------//
Takes base directory, returns an associative array
containing each directory name as an associative key
and each file as an indexed entry in the appropriate
directory.
If no path is provided, it uses the current directory
If $style == 1, it will return a sorted, non-associative
array
By Peter Dolan
www.peterd.net
Updated 2005-10-12
Use it as much as you like for whatever
For my own entertainment, please let me know if you do
//-----------------------------------------------------------*/
function dirTreeToArray( $path = "./", $style="0" ) {
if ( !is_string($path) or !($style==0 or $style==1) ) die("Improper arguments in function dirTreeToArray(string \$path, \$style = {0, 1})");
else {
$path = trim($path);
$path = str_replace("\\", "/", $path);
if( '/' == $path{strlen($path)-1} || '\'' == $path{strlen($path)-1} ) $path = substr($path, 0, strlen($path)-1);
}
$tree = array();
$arrayPointer = & $tree;
if ( $handle = opendir($path) ) {
while ( $fileName = readdir($handle) ) {
if ( $fileName != "." and $fileName != ".." ) {
$newPath = "$path/$fileName"; // Used for testing directory or file property
if ( is_dir($newPath) ) {
$dummyPointer = & $arrayPointer; // Save the current pointer
if ( $style == 0 ) $arrayPointer = & $arrayPointer[$fileName]; // Drop the pointer into a subdirectory
elseif ( $style == 1 ) $arrayPointer = & $arrayPointer[]; // Drop the pointer into a subdirectory
$arrayPointer = dirTreeToArray($newPath, $style); // Process the new subdirectory
if ( $style == 1 ) sort($arrayPointer); // Sort it if we're in a non-associative mode
$arrayPointer = & $dummyPointer; // Bring the pointer back up a level
}
elseif ( is_file($newPath) ) $arrayPointer[] = $fileName; // Enter the files
}
}
return $tree;
}
else die("Failed to open directory $path in function dirTreeToArray(string \$path, \$style = {0, 1})");
}
?>
tim_meredith at s4s dot org
13-Oct-2005 11:32
13-Oct-2005 11:32
--Convert MSWord Quotes--
Use this before any conversion to HTML entities or characters to clean up a form entry cut and pasted from MSWord.
function fixword($scratch)
{
$start=chr(226).chr(128);
$word=array();$fixword=array();
$word[]=$start.chr(152);$fixword[]="'";
$word[]=$start.chr(153);$fixword[]="'";
$word[]=$start.chr(156);$fixword[]="\"";
$word[]=$start.chr(157);$fixword[]="\"";
return str_replace($word, $fixword, $scratch);
}
webmaster at cafe-clope dot net
14-Aug-2005 02:40
14-Aug-2005 02:40
A comprehensive concatenation function, that works with array and strings
<?php
function str_cat() {
$args = func_get_args() ;
// Asserts that every array given as argument is $dim-size.
// Keys in arrays are stripped off.
// If no array is found, $dim stays unset.
foreach($args as $key => $arg) {
if(is_array($arg)) {
if(!isset($dim))
$dim = count($arg) ;
elseif($dim != count($arg))
return FALSE ;
$args[$key] = array_values($arg) ;
}
}
// Concatenation
if(isset($dim)) {
$result = array() ;
for($i=0;$i<$dim;$i++) {
$result[$i] = '' ;
foreach($args as $arg)
$result[$i] .= ( is_array($arg) ? $arg[$i] : $arg ) ;
}
return $result ;
} else {
return implode($args) ;
}
}
?>
A simple example :
<?php
str_cat(array(1,2,3), '-', array('foo' => 'foo', 'bar' => 'bar', 'noop' => 'noop')) ;
?>
will return :
Array (
[0] => 1-foo
[1] => 2-bar
[2] => 3-noop
)
More usefull :
<?php
$myget = $_GET ; // retrieving previous $_GET values
$myget['foo'] = 'b a r' ; // changing one value
$myget = str_cat(array_keys($myget), '=', array_map('rawurlencode', array_values($myget))) ;
$querystring = implode(ini_get('arg_separator.output'), $myget)) ;
?>
will return a valid querystring with some values changed.
Note that <?php str_cat('foo', '&', 'bar') ; ?> will return 'foo&bar', while <?php str_cat(array('foo'), '&', 'bar') ; ?> will return array(0 => foo&bar)
t0russ at gmail dot com
14-Jun-2005 08:38
14-Jun-2005 08:38
to kristin at greenaple dot on dot ca:
thanx for sharing.
your function in recursive form proved to be slightly faster and it returns false (as it should) when the character is not found instead of number 0:
<?php
function strnposr($haystack, $needle, $occurance, $pos = 0) {
return ($occurance<2)?strpos($haystack, $needle, $pos):strnposr($haystack,$needle,$occurance-1,strpos($haystack, $needle, $pos) + 1);
}
?>
rh at richardhoward dot net
05-Jun-2005 09:41
05-Jun-2005 09:41
<?php
/**
Utility class: static methods for cleaning & escaping untrusted (i.e.
user-supplied) strings.
Any string can (usually) be thought of as being in one of these 'modes':
pure = what the user actually typed / what you want to see on the page /
what is actually stored in the DB
gpc = incoming GET, POST or COOKIE data
sql = escaped for passing safely to RDBMS via SQL (also, data from DB
queries and file reads if you have magic_quotes_runtime on--which
is rare)
html = safe for html display (htmlentities applied)
Always knowing what mode your string is in--using these methods to
convert between modes--will prevent SQL injection and cross-site scripting.
This class refers to its own namespace (so it can work in PHP 4--there is no
self keyword until PHP 5). Do not change the name of the class w/o changing
all the internal references.
Example usage: a POST value that you want to query with:
$username = Str::gpc2sql($_POST['username']);
*/
//This sets SQL escaping to use slashes; for Sybase(/MSSQL)-style escaping
// ( ' --> '' ), set to true.
define('STR_SYBASE', false);
class Str {
function gpc2sql($gpc, $maxLength = false)
{
return Str::pure2sql(Str::gpc2pure($gpc), $maxLength);
}
function gpc2html($gpc, $maxLength = false)
{
return Str::pure2html(Str::gpc2pure($gpc), $maxLength);
}
function gpc2pure($gpc)
{
if (ini_get('magic_quotes_sybase'))
$pure = str_replace("''", "'", $gpc);
else $pure = get_magic_quotes_gpc() ? stripslashes($gpc) : $gpc;
return $pure;
}
function html2pure($html)
{
return html_entity_decode($html);
}
function html2sql($html, $maxLength = false)
{
return Str::pure2sql(Str::html2pure($html), $maxLength);
}
function pure2html($pure, $maxLength = false)
{
return $maxLength ? htmlentities(substr($pure, 0, $maxLength))
: htmlentities($pure);
}
function pure2sql($pure, $maxLength = false)
{
if ($maxLength) $pure = substr($pure, 0, $maxLength);
return (STR_SYBASE)
? str_replace("'", "''", $pure)
: addslashes($pure);
}
function sql2html($sql, $maxLength = false)
{
$pure = Str::sql2pure($sql);
if ($maxLength) $pure = substr($pure, 0, $maxLength);
return Str::pure2html($pure);
}
function sql2pure($sql)
{
return (STR_SYBASE)
? str_replace("''", "'", $sql)
: stripslashes($sql);
}
}
?>
james dot d dot baker at gmail dot com
27-May-2005 08:45
27-May-2005 08:45
<?php
/*
Written By James Baker, May 27th 2005
sentenceCase($string);
$string: The string to convert to sentence case.
Converts a string into proper sentence case (First letter of each sentance capital, all the others smaller)
Example Usage:
echo sentenceCase("HELLO WORLD!!! THIS IS A CAPITALISED SENTENCE. this isn't.");
Returns:
Hello world!!! This is a capitalised sentence. This isn't.
*/
function sentenceCase($s){
$str = strtolower($s);
$cap = true;
for($x = 0; $x < strlen($str); $x++){
$letter = substr($str, $x, 1);
if($letter == "." || $letter == "!" || $letter == "?"){
$cap = true;
}elseif($letter != " " && $cap == true){
$letter = strtoupper($letter);
$cap = false;
}
$ret .= $letter;
}
return $ret;
}
?>
php at moechofe dot com
26-Apr-2005 04:34
26-Apr-2005 04:34
<?php
/*
* str_match
*
* return a string with only cacacteres defined in a expression return false if the expression is not valid
*
* @param $str string the string
* @param $match the expression based on the class definition off a PCRE regular expression.
* the '[', ']', '\' and '^' at class start need to be escaped.
* like : -a-z0-9_@.
*/
function str_match( $str, $match )
{
$return = '';
if( eregi( '(.*)', $match, $class ) )
{
$match = '['.$regs[1].']';
for( $i=0; $i<strlen($str); $i++ )
if( ereg( '['.$class[1].']', $str[$i] ) )
$return .= $str{$i};
return $return;
}
else return false;
}
/*
* example
* accept only alphanum caracteres from the GET/POST parameters 'a'
*/
if( ! empty($_REQUEST['a']) )
$_REQUEST['a'] = str_match( $_REQUEST['a'], 'a-zA-Z0-9' );
else
$_REQUEST['a'] = 'default';
?>
Pommef
19-Mar-2005 11:15
19-Mar-2005 11:15
Example: Give me everything up to the fourth occurance of '/'.
<?php
$haystack = "/home/username/www/index.php";
$needle = "/";
function strnpos($haystack, $needle, $occurance, $pos = 0) {
$res = implode($needle,$haystack);
$res = array_slice($res, $pos, $occurance);
return explode ($needle,$res);
}
?>
kristin at greenapple dot on dot ca
02-Jan-2005 06:32
02-Jan-2005 06:32
I really searched for a function that would do this as I've seen it in other languages but I couldn't find it here. This is particularily useful when combined with substr() to take the first part of a string up to a certain point.
strnpos() - Find the nth position of needle in haystack.
<?php
function strnpos($haystack, $needle, $occurance, $pos = 0) {
for ($i = 1; $i <= $occurance; $i++) {
$pos = strpos($haystack, $needle, $pos) + 1;
}
return $pos - 1;
}
?>
Example: Give me everything up to the fourth occurance of '/'.
<?php
$haystack = "/home/username/www/index.php";
$needle = "/";
$root_dir = substr($haystack, 0, strnpos($haystack, $needle, 4));
echo $root_dir;
?>
Returns: /home/username/www
Use this example with the server variable $_SERVER['SCRIPT_NAME'] as the haystack and you can self-discover a document's root directory for the purposes of locating global files automatically!
21-Dec-2004 06:31
In response to hackajar <matt> yahoo <trot> com,
No string-to-array function exists because it is not needed. If you reference a string with an offset like you do with an array, the character at that offset will be return. This is documented in section III.11's "Strings" article under the "String access and modification by character" heading.
andy a t onesandzeros d o t biz
10-Nov-2004 12:54
10-Nov-2004 12:54
I use these little doo-dads quite a bit. I just thought I'd share them and maybe save someone a little time. No biggy. :)
// returns true if $str begins with $sub
function beginsWith( $str, $sub ) {
return ( substr( $str, 0, strlen( $sub ) ) == $sub );
}
// return tru if $str ends with $sub
function endsWith( $str, $sub ) {
return ( substr( $str, strlen( $str ) - strlen( $sub ) ) == $sub );
}
// trims off x chars from the front of a string
// or the matching string in $off is trimmed off
function trimOffFront( $off, $str ) {
if( is_numeric( $off ) )
return substr( $str, $off );
else
return substr( $str, strlen( $off ) );
}
// trims off x chars from the end of a string
// or the matching string in $off is trimmed off
function trimOffEnd( $off, $str ) {
if( is_numeric( $off ) )
return substr( $str, 0, strlen( $str ) - $off );
else
return substr( $str, 0, strlen( $str ) - strlen( $off ) );
}
[tab!]
27-Oct-2004 10:29
27-Oct-2004 10:29
//
// string strtrmvistl( string str, [int maxlen = 64],
// [bool right_justify = false],
// [string delimter = "<br>\n"])
//
// splits a long string into two chunks (a start and an end chunk)
// of a given maximum length and seperates them by a given delimeter.
// a second chunk can be right-justified within maxlen.
// may be used to 'spread' a string over two lines.
//
function strtrmvistl($str, $maxlen = 64, $right_justify = false, $delimter = "<br>\n") {
if(($len = strlen($str = chop($str))) > ($maxlen = max($maxlen, 12))) {
$newstr = substr($str, 0, $maxlen - 3);
if($len > ($maxlen - 3)) {
$endlen = min(($len - strlen($newstr)), $maxlen - 3);
$newstr .= "..." . $delimter;
if($right_justify)
$newstr .= str_pad('', $maxlen - $endlen - 3, ' ');
$newstr .= "..." . substr($str, $len - $endlen);
}
return($newstr);
}
return($str);
}
terry dot greenlaw at logicalshift dot com
12-Aug-2004 08:52
12-Aug-2004 08:52
Here's a simpler "simplest" way to toggle through a set of 1..n colors for web backgrounds:
<?php
$colours = array('#000000', '#808080', '#A0A0A0', '#FFFFFF');
// Get a colour
$color = next($colors) or $color = reset($colors);
?>
The code doesn't need to know anything about the number of elements being cycled through. That way you won't have to tracking down all the code when changing the number of colors or the color values.